Washbasins
Range + installation documentedCurrent documentation covers multiple basin installation types and a selected standard-size range.
- 10 supplier-scheduled basin formats with dimensions and finish options
- Wall-hung, countertop, semi-inset, pedestal and cabinet-mounted pathways
- Selected model-specific plumbing documentation held; live IAPMO listing verification remains outstanding
Vanity cabinets
Installation documentedCabinet guidance covers wall condition, reinforcement, anchors and basin/countertop installation.
- Solid or reinforced wall pathway preferred
- Hollow-wall conditions require reinforcement and suitable fixings
- Final cabinet height and mounting position remain project-specific
Bath systems
Installation + handling documentedThe current bath guide adds handling, drainage-clearance, levelling and leak-test requirements.
- Heavy-item handling must be planned by model
- Waste/trap clearance checked before installation
- Fill-and-drain leak test required after connection
Shower trays
Installation guide receivedKKR advises that its usual shower trays have rib-reinforced undersides, generally without continuous bedding; support requirements still depend on the selected model and project substrate.
- Generic guide illustrates a subfloor opening and 2-inch PVC waste interface; do not assume universal dimensions
- Compatible wastes may be ordered separately; dimensioned PDF drawings are available on request
- No tested maximum-load data supplied; obtain the slip-test report before stating a rating
- Confirm load path, rib or perimeter bearing and installation interface for every tray model
Wall-hung basin fixings
Hardware details receivedThe manufacturer confirms standard accessories for applicable wall-hung basins. Substrate-specific fixing design and load verification remain project responsibilities.
- 304 stainless steel brackets in 2 mm and 3 mm variants
- KKR-P17 fixing drawing identifies M10 × 140
- Do not infer a tested load rating from the demonstration video
Manufacturer warranty
Scope confirmed by supplierKKR’s written limited warranty covers defects in materials and workmanship in solid-surface products under normal use and maintenance, for ten years from delivery.
- KKR determines whether to repair or replace a defective product
- Excludes misuse, excessive heat, non-manufacturing breakage, improper care, unauthorised repair and customer design defects
- No separate hotel or resort warranty schedule is provided; project supply terms and local statutory rights are considered separately
- Tapware, cabinetry, wastes and accessories are not included in this solid-surface warranty statement
Maintenance + refinishing
Guidance receivedSolid-surface cleaning and minor refinishing guidance is available for project O&M documentation.
- Routine mild-detergent cleaning
- Non-scratch cleaning pathway for tougher marks
- Sanding/refinishing pathway for scratches or small chips
Coordinated tapware
Evidence reviewOptional coordinated tapware is evaluated for overseas hospitality projects against destination-country requirements; no blanket certification claim is made.
- Supplier identifies 304 or 316 stainless steel by individual catalogue model
- Selected finishes vary by model
- Certification, drinking-water and flow requirements are verified per product and destination before quotation or release