Skip to main content
Apollo NZ Global
Get a QuoteMy Project
Request Project Pricing
Complete Outdoor Sports Facilities

ATHREN · LUTHVAR · VETRAVA / OUTDOOR SPECIFICATION

Compare outdoor sports systems by construction, not headlines.

Use one side-by-side technical guide to compare Apollo's existing permanent and modular court surfaces, athletics facility pathways and padel configurations. Every reference figure is conditional on the exact quoted product and site; supplier candidates awaiting technical approval are not included.

Product construction

What is being supplied and which project conditions control suitability.

Exact-system evidence

Reference dimensions are not independent test results or a certification for a finished facility.

Local installation

Apollo is supply-only. Local engineering, substrate works, installation and approvals remain with the project team.

01 / SELECT SYSTEM FAMILY

Different types of sports facility need different comparisons.

Select a category to review the relevant products. Add systems to the specification worksheet only when they belong to your project.

Site-applied acrylic, resilient acrylic and modular tiles are different construction families. An existing hard-base survey and the intended sport should determine which is shortlisted.

02 / SIDE-BY-SIDE REFERENCE COMPARISON

ATHREN surface pathways

References are taken from Apollo's existing technical and product pages. They are not substitute manufacturers' drawings or installation manuals.

IncludeSystem and constructionReference and potential fitConfirm before order
ATHREN · Permanent site-applied acrylicMC Classic Hard Acrylic

Textured acrylic finish, levelling layers and prepared hard base; no separate cushion.

Product pathway

Approx. 1–2 mm reference finish system; final build-up and film thickness are installation-dependent.

Typical fit

School, council and club hard courts requiring a direct hard-court feel.

Characteristic

Permanent seamless surface construction and familiar hard-court maintenance pathway.

Cracking, joints, ponding, substrate and exact local preparation.

Supplier or project evidence
  • Complete applied system TDS and layer schedule
  • Approved substrate and crack/joint treatment
  • Installer method, curing and ambient limits
Existing Apollo pathway
ATHREN · Permanent layered resilient acrylicAX3 / AX4 / AX5 Cushioned Acrylic

Elastic granular cushioning and site-applied acrylic playing finish; model-specific layer sequence.

Product pathway

Nominal AX3, AX4 and AX5 family thicknesses: 3, 4 and 5 mm respectively.

Typical fit

School, club and resort courts prioritising a resilient applied court construction.

Characteristic

Choice of nominal cushion build-ups with continuous acrylic playing finish.

Layer tolerances, exact cushion composition, base, weather and installer skill.

Supplier or project evidence
  • Exact AX model and complete layer count
  • Curing and substrate TDS, site conditions
  • Current traction/ball-response reports if claimed
Existing Apollo pathway
ATHREN · Permanent prefabricated cushion plus acrylicRM4 Rubber-Sheet Cushion

4 mm rubber-sheet cushion core below a separately applied acrylic court finish.

Product pathway

4 mm nominal cushion core; NOT a claim that the total completed system is only 4 mm.

Typical fit

Premium club, academy and resort projects where a separate cushion sheet suits the brief.

Characteristic

Defined prefabricated resilient layer supporting the finished playing surface.

Moisture, glue bond, sheet seams, base tolerance and exact total assembly.

Supplier or project evidence
  • Sheet-core and adhesive data
  • Primer / moisture / seam detailing
  • Finished-layer system and surfacing TDS
Existing Apollo pathway
ATHREN · Modular interlocking polypropyleneCT Open-Grid PP Tiles

Open-grid snap-lock PP module over prepared hard base with designed drainage and movement allowance.

Product pathway

Reference 250 mm / 305 mm modules; selected performance family approx. 340–350 mm. Exact variant governs.

Typical fit

School and shared-use hard-base courts where modular replacement and drainage are considerations.

Characteristic

Replaceable tiles and ventilated open-grid construction.

Movement allowance, expansion, edge ramps, bounce, impact noise and base drainage.

Supplier or project evidence
  • Exact variant drawing, dimensions and weights
  • Expansion/edge/ramp and base detail
  • Ball response / slip reports for exact module
Existing Apollo pathway
ATHREN · Modular resilient TPERT Resilient TPE Tiles

Moulded resilient interlocking tile with model-specific support/drainage geometry.

Product pathway

Selected 250 / 305 / 400 mm module families; nominal 13–16 mm thickness depends on variant.

Typical fit

School, club and selected recreation courts where more compliant tile response is being assessed.

Characteristic

Modular replacement and a distinct resilient playing feel relative to firm PP families.

Model-specific ball response, exposure, edge ramps and true installed performance.

Supplier or project evidence
  • Exact model dimension and formulation
  • Independent model-level playing performance reports
  • Warranted outdoor exposure and colour
Existing Apollo pathway
ATHREN · Modular firm polypropyleneRC14 Firm Racquet PP Tiles

Textured high-impact PP interlocking tile with drainage geometry and stable hard base.

Product pathway

305 × 305 × 14 mm reference module.

Typical fit

Dedicated or shared racquet courts where a firmer PP response is desired.

Characteristic

Replaceable firm tile family with defined reference module geometry.

Perimeter expansion, slip, ball bounce and exact sport compatibility.

Supplier or project evidence
  • Exact RC14 tested model and product drawing
  • Current pace/traction/ball response data
  • Base, movement, perimeter and ramp design
Existing Apollo pathway

“Existing Apollo pathway” means a currently presented product family—not unconditional stock availability, independent certification or approval for every destination. “Project pathway” requires exact model selection.

03 / TECHNICAL SUBMITTALS

Permanent and modular surfaces solve different site briefs.

Compare the existing base, drainage, sport, ball behaviour and whether the court needs permanent coating or replaceable modular panels. Nominal thickness alone does not tell you how a court plays or how it must be maintained.

Project documentation checklist

  • Existing asphalt / concrete survey, cracking, joints, moisture and levels
  • Court use, markings and required sport-specific testing
  • Drainage, thermal movement and perimeter detailing
  • Exact TDS, surface layers and installation/curing limits
  • Warranty, repair strategy, cleaning and handover
Build site- and climate-specific readiness checklist
04 / PRELIMINARY TECHNICAL SCOPE

Assemble an enquiry, not a guessed specification.

Compare across categories, select the possible systems, then copy the outline for an architect, engineer, installer or Apollo project manager. No data is sent unless you choose to submit a separate enquiry.

Selected systems

0 selected

Use the comparison table above to select one or more products or project pathways.

Site readiness checklist
Preliminary specification outline
APOLLO NZ GLOBAL | OUTDOOR SPORTS SYSTEMS — PRELIMINARY TECHNICAL SCOPE
Project application: school court
Delivery destination: Destination to be confirmed
Status: INFORMATION REQUEST / DRAFT ONLY — NOT AN ISSUED TECHNICAL SPECIFICATION, QUOTATION OR CERTIFICATE.
No supplier proposed-model approval is implied.

PROJECT-WIDE INFORMATION REQUIRED
Sports and level of play; quantity/playing geometry; surveyed available area; base/soil/drainage; site climate; service/electrical; civil/structural design; relevant sport rules; local permits and approvals; installation team; freight and unloading; operation and maintenance.
APOLLO SUPPLY BOUNDARY
Apollo NZ Global supplies selected products and available manufacturer documents only; local engineering, site works, installation, inspections and venue certification are the responsibility of the destination project team unless separately agreed.
All model figures are reference information subject to the exact approved quotation and submittal.

Working outline only. Final specifications require exact model submittals, local design and written approval.

Supplier candidates remain under technical review.

New running-track materials, silicone PU, EPDM and padel models being evaluated with additional suppliers are not included as approved products in this public comparison. A manufacturer's catalogue, or certification of one named surface, must not be presented as proof that every model or finished venue is certified.

Need Apollo to review it?

Turn the result into a project brief.

Project