Skip to main content
Apollo NZ GlobalRequest Project Review

Protected roof glazing

Impact-resistant skylight and rooflight pathways for severe-storm buildings.

Roof glazing is part of the building envelope. Apollo's impact-skylight pathway covers selected residential, commercial and institutional rooflights where wind pressure, debris impact, curb or frame attachment, flashing and water management need to be reviewed together.

Roof glazing + daylightingImpact + pressure evidenceResidential → commercial

Storm, hurricane & cyclone protection · direct answers

Start with the whole failure pathway, not one storm product.

Apollo coordinates severe-storm protection across the building envelope, structure, refuge, critical equipment and water pathways, then matches each system to the region and exact evidence.
01

What does Storm, Hurricane & Cyclone Protection Systems include?

The programme covers opening protection, impact glazing and screens, roof and structural load-path strengthening, storm safe rooms and community shelters, protected rooftop/HVAC equipment, high-wind solar mounting, generator enclosures and links into passive, opening and perimeter flood defence.

02

Can one hurricane certification be used in every market?

No. Florida/Gulf Coast, Caribbean/Bahamas, Pacific Islands, Australian cyclone regions and typhoon markets can follow different codes, approvals and engineering practices. Apollo checks the destination pathway before making a project-specific compliance or performance claim.

03

What is the difference between a storm shelter and a FEMA safe room?

For U.S. projects, ICC 500 establishes storm-shelter requirements. A project described as a FEMA safe room also needs to follow the applicable FEMA P-361 criteria. FEMA does not certify or approve individual manufacturers or shelter products.

04

What information should Apollo receive first?

Send the project location, building type, drawings or clear photographs, known hazard and code information, opening schedule where available, structural details, intended shelter occupancy if relevant, flood or storm-surge information and any critical equipment that needs to remain operational.

05

Does Apollo install these systems?

Apollo is supply-only. Final structural design, anchors and fixings, installation, local engineering, approvals and code compliance remain project-specific unless expressly included in the written supply scope.

Protection system · direct answers

What project teams need to know about Impact Skylights & Rooflights.

Use this page for early system selection; final performance follows the exact tested, listed or engineered configuration and the actual project.
01

What is Impact Skylights & Rooflights?

Roof glazing is part of the building envelope. Apollo's impact-skylight pathway covers selected residential, commercial and institutional rooflights where wind pressure, debris impact, curb or frame attachment, flashing and water management need to be reviewed together.

02

What project information should Apollo receive first?

Send the project location, building type, drawings or clear photographs, relevant dimensions and structural information, and any known wind, design-pressure, impact, flood, shelter, access or local-code requirements that apply to this system.

03

Can this system be specified from website information alone?

No. Site hazard, dimensions, loads, support and anchorage, exact product configuration, installation method, applicable technical evidence and local approvals can all change the final specification.

04

Does Apollo install this protection system?

Apollo is supply-only. Final engineering, fixings, installation, approvals and local code compliance remain with the appropriate manufacturer, approved specialist or client-side project team unless expressly included in the written scope.

05

Can Apollo review this system for international projects?

Yes, where the product and project can be supported. Destination hazard, climate, freight, documentation, local engineering, certification and installation responsibilities are reviewed before supply.

Whole-Property Storm ProtectionMap the shell, structure, refuge, critical systems and water pathway before choosing products.
  • Openings + glazing
  • Roof + load path
  • Safe rooms + shelters
  • Rooftop plant
  • Critical power
  • Solar mounting
  • Flood + surge
01Project guidance

A protected façade can still have vulnerable roof glazing.

Skylights, rooflights and daylight systems should be included in the severe-weather opening schedule, particularly on buildings with large roof apertures or critical occupied areas below.

02Project guidance

The tested assembly matters.

Glazing or polycarbonate material alone does not define performance. Frame, curb, fasteners, tested dimensions, pressure ratings, impact category and installation configuration need to correspond with the proposed roof opening.

03Project guidance

Water management is separate from impact resistance.

Flashing, curb height, roof membrane transitions, drainage and wind-driven rain details remain essential even when the rooflight has appropriate wind and impact evidence.

04Project guidance

Commercial rooflights can require different systems from residential skylights.

Large spans, repeated units, smoke/ventilation functions, access and roof structure can move the project into a different product and approval pathway.

Plan · compare · specify

Use the wider Apollo protection pathway.

Project-specific performance

Performance follows the exact system and project.

Opening size, positive and negative design pressures, impact requirements, tracks or frames, anchors and structural substrate all affect final performance. Numerical wind, impact and certification information is matched to the applicable tested or engineered configuration for the project.

Testing, standards & specification

Planning your project

Plan your Hurricane & Cyclone Complete-Building Protection project.

These are the useful details to share when enquiring. We'll help confirm the appropriate options, information and supply quotation.

01

Application & use

Intended users / buyers: commercial-development. Confirm the actual application, operating intensity and project outcome.

Please note: A product-category match is not a final suitability confirmation.

02

Site & environment

Review high-wind · cyclone-hurricane plus wind, rain, heat, UV, salt, drainage and other destination conditions that apply.

Please note: Environmental performance depends on the selected system and its confirmed technical specifications.

03

Configuration & dimensions

Confirm configuration: project-reviewed, together with dimensions, quantities, interfaces and required options.

Please note: Available sizes, spans, loads and options are confirmed for the selected system.

04

Materials, finishes & maintenance

Review fabric against finish, corrosion, cleaning, maintenance and replacement requirements.

Please note: Material suitability can change with exposure, assemblies and maintenance conditions.

05

Product guides & specifications

Tell us which product information you need, such as a datasheet, specification, guide or test report for your chosen model.

Please note: Technical documents, calculations, certificates and tests are only provided where available for the selected system and confirmed in the quotation.

06

Drawings & installation requirements

If your project needs dimensions, fixing details, shop drawings or installation information, include these requirements in your enquiry.

Please note: Final dimensions, fixing details, structural requirements and installation drawings are confirmed for each project.

07

Country & delivery location

Tell us where the products will be used and delivered so we can check availability, freight, climate considerations and applicable product information.

Please note: Local building requirements, engineering and approvals must be confirmed with the appropriate professionals in the destination country.

08

Commercial project requirements

For tenders or larger projects, share the model, dimensions, finishes, required documents, expected delivery date and the scope you would like Apollo to supply.

Please note: Specifications and any required test information must match the final model and written quotation.

09

Project interface & delivery

Confirm destination, receiving point, unloading, local contractor, foundations / supports, services, installation responsibility and target programme.

Please note: Freight, local works, engineering, commissioning and installation scope must be confirmed in the written quotation.

Apollo is supply-only unless the written project scope states otherwise. Local engineering, statutory approvals, site works and installation remain project-specific.

Connected project pathway

Everything you need to take the next project step.

Complete-Building Protection
Planning & specification

Impact Skylights & Rooflights: what to define before quotation.

Roof glazing is part of the building envelope. Apollo's impact-skylight pathway covers selected residential, commercial and institutional rooflights…

Applications
  • homes
  • resorts
  • commercial buildings
  • public facilities
Specification evidence
  • Verified product specifications or documented product facts
  • Clear applications, limitations and configuration boundaries
  • Project inputs required for manual quotation or technical review
  • Apollo supply-only scope and purchaser/local-project responsibilities
Compare before selecting
  • Dimensions, capacity or coverage required for the real site.
  • Materials, finishes and environmental exposure.
  • Installation, interfaces, services and maintenance access.
  • Technical documents, local approvals and project responsibilities.
Regional project pathwayHurricane & Cyclone Complete-Building Protection for Pacific Island projects

Review this system against the actual island, coastal exposure, wind or cyclone criteria, freight route and local project responsibilities before the final configuration is selected.

Product informationNeed a datasheet, drawing or technical guide?

Tell us the product or model, project location and what information you need. We'll confirm what can be provided for your chosen system and quotation.

Request product information

Apollo NZ Global · International project supply

Start with the property. We’ll help map the severe-storm protection pathway around it.

Send the project location, drawings or photos, known wind/code requirements, flood or storm-surge information and any shelter or critical-equipment requirements.

Request a Project Review Upload Plans

Supply-only project model. Final structural design, shelter design, fixings, installation, local approvals and code compliance remain project-specific unless expressly included in the quoted supply scope.

Project