Court lines
The regulation playing court is 20 × 44 feet for singles and doubles. This is the line-marked court, not the whole facility footprint.
New Zealand Decision Centre / New Zealand
The painted court is smaller than the practical playing area. New Zealand projects also need to allow for run-off, drainage, fencing, lighting, access, spectators and any acoustic or neighbour considerations.
Only need basic information? Ask Apollo a quick question — no project drawings needed.

Direct answer
USA Pickleball's official rulebook sets the court at 20 ft × 44 ft (6.10 m × 13.41 m). Its minimum playing surface area is 30 ft × 60 ft (9.14 m × 18.29 m), with a larger 40 ft × 64 ft surrounding-margin option described in the rulebook. Multi-court sites need additional circulation and facility space.
Project decision
Use these points to structure the first project conversation. Final suitability stays tied to the actual site, selected system and local project team.
The regulation playing court is 20 × 44 feet for singles and doubles. This is the line-marked court, not the whole facility footprint.
USA Pickleball identifies a minimum playing surface of 30 × 60 feet and also describes a 40 × 64 foot surrounding-margin option. The project may need more for circulation, fencing and spectators.
Outdoor sites should coordinate base, falls, drainage, lighting, fencing, neighbouring receivers, acoustic planning and local approvals with the wider facility design.
Comparison matrix
Use metric dimensions for the project plan while retaining the official rule references.
| Layer | Dimension / allowance |
|---|---|
| Court | 6.10 × 13.41 m |
| Minimum playing surface | 9.14 × 18.29 m |
| Larger surrounding-margin option | 12.19 × 19.51 m |
| Facility beyond court | Add fencing, circulation, lighting, seating and access as required |
Project brief
Frequently asked
No. Site conditions, scale, permanence, local works, operating expectations and documentation requirements change the right starting point.
No. Apollo uses a manual project-brief process so the selected system, quantities, destination, freight and project interfaces are checked before pricing.
Apollo supplies products only. The purchaser independently arranges and manages all engineering, approvals, foundations, services, installation, contractors and site works. Apollo does not organise onsite providers.
Primary references
Next step
Send the site, dimensions, intended use, quantities and known local requirements. Apollo will review the relevant product pathway and keep local engineering, approvals and site-work responsibilities explicit.