Skip to main content
Apollo NZ Global
Get a QuoteMy Project
Learning Centre
FIRE & RESCUE / FACILITATOR RESOURCE

FREE CLASSROOM DISCUSSION MATERIAL

Firefighting Robotics: Instructor Briefing Pack

A structured, print-friendly 45-minute technology-awareness conversation for fire services and industrial response teams, with a manufacturer-evidence review checklist.

View session plan

Not a certified training programme. This pack is for introductory classroom discussion and technology evaluation only. It is not a fireground exercise plan, tactical guide, operator qualification, or evidence of safety approval. All operational procedures, competence requirements and live demonstrations must be authorised and developed by qualified fire service personnel.

KERVYNT / LEARNING RESOURCE

Facilitator's preparation sheet

Use the following fields to record your organisation's own meeting details. Do not include incident-sensitive information in public materials.

45 MIN
Organisation / group
Date / facilitator
Intended equipment task
Site or environment type

PART ONE / RUN OF SESSION

45-minute classroom discussion

Times are suggested for a facilitated conversation, not an accredited course duration.

0105 MIN

Set the learning boundaries

Identify a local capability gap without proposing a response tactic.

Ask the room

What information or equipment task would the organisation most value at a distance?

Capture

One sentence describing the technology-awareness objective.

0210 MIN

Compare equipment families

Distinguish a fire-monitor platform from inspection, ventilation, surface rescue and other specialist robots.

Ask the room

What does each category actually do, and what infrastructure does it depend on?

Capture

A short list of potentially relevant and irrelevant equipment classes.

0310 MIN

Discuss a building or industrial scenario

Identify site constraints and uncertainty without giving incident directions.

Ask the room

What would obstruct access, radio communications, sensors, hoses or recovery?

Capture

A map of open questions for a qualified reviewer.

0410 MIN

Review the manufacturer's evidence

Separate marketing claims from model-specific documents and comparable test conditions.

Ask the room

Which advertised capabilities have a current technical sheet or repeatable demonstration?

Capture

A preliminary supplier-evidence request list.

0505 MIN

Clarify people and responsibilities

Identify who would need to approve, operate, maintain and assess a system.

Ask the room

Which authority defines local operating requirements and who manages the equipment lifecycle?

Capture

Named internal roles to establish before procurement.

0605 MIN

Summarise next questions

Finish with evidence gaps, not a purchase or deployment decision.

Ask the room

Which three questions should be sent to suppliers or appropriate technical specialists?

Capture

An evidence-gathering action list.

PART TWO / EQUIPMENT REVIEW

Manufacturer evidence worksheet

The table is a preparation tool for gathering information, not a substitute for review by qualified engineers, procurement staff or agency leadership.

What to verifySupporting evidence to requestReviewed?
Manufacturer and model identityLegal manufacturer, exact model/version, data-sheet issue date
Intended taskSuppression, thermal/gas reconnaissance, ventilation, surface rescue or another clearly named function
Ground accessDimensions, weight, ground clearance, surfaces, slopes and recovery limitations
Connections and servicesWater/foam source, hose, charging, fuel, data and control interfaces as applicable
CommunicationsControl range test method, obstacles, latency and documented loss-of-signal response
Sensors and payloadExact fitted cameras, thermal imagers, gas detectors and calibration requirements
Certifications and permitsComplete model-specific certificates for the actual site and destination
Operational readinessAgency authorisation, operator instruction, maintenance, training and local service

OPTIONAL VISUAL TEACHING AIDS

Eight illustrated topics to support discussion

Use the original diagrams as prompts, not as operational diagrams. The full-resolution artwork and companion lessons are available in the online visual library.

LESSON 01How firefighting robots work
LESSON 02Robots around building fires
LESSON 03Water and foam robotic fire monitor systems
LESSON 04Explosion-proof robot certification evidence
LESSON 05Thermal imaging, video and gas sensing
LESSON 06Robotic smoke extraction and ventilation
LESSON 07Wildland, flood and disaster response robots
LESSON 08How a fire service evaluates robotics capability
Open the complete visual learning library

Resource: https://apollonzglobal.com/industrial-firefighting-robots/diagram-library

PART THREE / GROUP DISCUSSION

Five non-tactical case questions

  1. A catalogue advertises 80 L/s and 85 m reach. Which missing test and infrastructure details prevent a direct comparison?
  2. Two brochures use the same model code but show different machine weights. What should be verified before quoting either one?
  3. A supplier describes a robot as both IP67 and explosion-proof. Which separate claims require distinct evidence?
  4. A clear outdoor demonstration shows a stable control link. What changes in a reinforced building or underground structure?
  5. A reconnaissance robot returns a thermal image and a gas reading. What conclusions remain unsupported?

PART FOUR / OUTCOME

Three evidence requests to carry forward

01
02
03

This worksheet does not record an equipment approval, training qualification or procurement recommendation.

REFERENCE READING

Follow the research

Independent background: NIST emergency response robot performance and FSRI Fire Safety Academy. Neither organisation sponsors or endorses this KERVYNT resource.

Want the complete learning collection?

Read the eight educational lessons before comparing supplier equipment or requesting project details.

Return to Learning Centre
Project