Community / education
School/training hall with safe goals, resilient floor and wall protection.
GLOBAL SPORTS TECHNICAL LIBRARY
INDOOR HALL · HANDBALL TECHNICAL CENTRE
Handball facility technical centre.
Handball combines a large indoor court, fast play, powerful goal impacts and substantial spectator/event infrastructure. Goal restraint, wall protection and shared-hall changeover need to be designed rather than improvised.
Apollo Technical Reference · Edition 2026.1 · Governing references reviewed October 2026 · always verify the current competition documents for final design.
0140 × 20 m playing court
023 × 2 m goal reference
03IHF rules amended July 2025
04Shared-hall + arena pathways
INTERACTIVE FACILITY MAP
See the handball facility as one connected system.
Select a layer to see why it matters. This is a conceptual coordination map—not a dimensioned court, field, structural or compliance drawing.
HANDBALLPLAYING AREA
FACILITY ENVELOPE · CIRCULATION · TECHNICAL INTERFACES
SPORT→SURFACE→EQUIPMENT→STRUCTURE→LIGHT→SPECTATORS→TECHNOLOGY→OPERATIONS
FACILITY LEVEL MATRIX
The technical brief changes with the level of venue.
Do not copy elite-event requirements into every community project—or under-specify a competition venue from a school checklist.
Club / academy
Club hall with repeat goal handling, team zones, scoreboard and spectators.
Competition
Competition hall with exact court/equipment, lighting, officials and event infrastructure.
Elite / major venue
Arena with major seating, FÍSVOR, broadcast lighting, media and professional operations.
12 TECHNICAL TOPICS
Design the complete handball environment.
Each topic is part of the same facility. Changing one layer can affect several others, which is why product selection should follow the complete brief.
01
Playing geometry
Protect court, goal areas, safety/run-off, team/substitution zones and officials positions before spectator or shared-use overlays.
02
Surface / playing system
Use a resilient, flat, consistent indoor floor with line marking and protection matched to handball and secondary sports.
03
Sport equipment
Goals, nets, restraint/anchoring, padding/protection and handling trolleys must be exact, safe systems.
04
Lighting
Coordinate high-speed ball visibility, uniformity, glare and broadcast camera requirements.
05
Spectators
Separate spectator and team circulation, accessible viewing and arena seating from player safety zones.
06
Structure + building interface
Goal anchors/restraint, wall protection, dividers, displays, lighting and roof services all interact.
07
Environment
Ventilation and thermal comfort should avoid strong draughts and condensation on the playing surface.
08
Accessibility
Accessible spectators and venue circulation should be planned outside the safety envelope and team zones.
09
Storage + changeover
Goals, nets, benches, protection and divider equipment need large, nearby storage and safe handling routes.
10
Technology + controls
Game clock, scoreboards, electronic timeout systems, FÍSVOR and PA should be coordinated with officials/control positions.
11
Evidence + standards
Use current IHF Rules of the Game and court/goal guidelines; exact equipment and local structural evidence remain separate.
12
Maintenance + lifecycle
Inspect goals/restraint, nets, floor, wall protection, scoring, dividers and seating after repeated use/changeovers.
EVIDENCE LADDER
Do not collapse different kinds of evidence into one “approved” claim.
Official rule / governing reference
Defines the sport or competition requirement. It does not automatically approve a supplier or construction detail.
Product test / approval
Applies to an exact surface, equipment item or system configuration and the scope stated by the governing programme.
Installed facility test / certification
Where the sport offers it, field/court/facility testing confirms the finished installation rather than only the product.
Project engineering
Foundations, supports, wind/seismic loads, electrical, building interfaces and local-code compliance remain project-specific.
Commercial release
Warranty, documentation, spares, freight, installation responsibility and exact quoted configuration are closed before order.
SPECIFICATION INPUTS
Information a useful handball specification should contain.
These inputs can become a consultant brief, RFP schedule or Apollo project review without prematurely inventing an exact model.
01
Competition level
02
Court/safety envelope
03
Floor
04
Goals/restraint
05
Wall protection
06
Team/official zones
07
Lighting
08
Scoring/time-out
09
Spectators
10
Storage/changeover
PERFORMANCE-SPECIFICATION STARTERS
Clause intent that can be developed into the project specification.
These are performance-based starting points, not a substitute for the project architect, engineer, governing body or exact selected-system data.
Playing environment
Protect court, goal areas, safety/run-off, team/substitution zones and officials positions before spectator or shared-use overlays.
Surface performance
Use a resilient, flat, consistent indoor floor with line marking and protection matched to handball and secondary sports.
Evidence and approvals
Use current IHF Rules of the Game and court/goal guidelines; exact equipment and local structural evidence remain separate.
Maintenance and lifecycle
Inspect goals/restraint, nets, floor, wall protection, scoring, dividers and seating after repeated use/changeovers.
DRAWING ROADMAP
Draw the interfaces that words usually miss.
Public planning diagrams can define intent. Exact fabrication, foundation, fixing and model drawings should follow only when the selected system is verified.
Court plan
Goal restraint detail
Wall protection elevations
Lighting plan
Team/substitution/scorer layout
Seating plan
Storage route
TECHNICAL DIAGRAM PACK
Handball planning diagrams for the interfaces that written specifications miss.
Four vector sheets cover plan geometry, vertical coordination, equipment/operations and spectator/technology interfaces. Verified sport dimensions are shown only where the technical baseline supports them; conceptual allowances remain explicitly labelled.
PACKLTV-HANDBALL
SPORTHandball
REFERENCE REVIEW04 OCT 2026
STATUSPLANNING / COORDINATION
01
Dimensioned Plan
02
Vertical / Section Coordination
03
Equipment + Operations Zoning
04
Spectator + Lighting + Technology
Planning diagram status
These diagrams organise coordination information. They are not fabrication drawings, engineering drawings, construction details, certified court/field layouts or statutory documentation. Current governing-body requirements, exact selected-system drawings and local professional design take precedence.
MAINTENANCE & LIFECYCLE
Make performance maintainable.
01Floor
02Goals/restraint
03Nets
04Padding/wall protection
05Score/time-out equipment
06Lighting
07Dividers
08Seating
TROUBLESHOOTING
Common symptoms worth investigating.
Goal movement
Check anchor/restraint and frame.
Wall impact risk
Review safety distance and protection.
Floor contamination/slip
Check cleaning and footwear/adhesive contamination.
Score/time-out failure
Check power, controls and protocol.
Storage damage
Review trolleys, doors and stacking.
Glare
Review fixtures and reflective surfaces.
SPORTS PLANNING CALCULATORS
Turn early ideas into measurable planning inputs.
These are concept-planning tools—not engineering, certification, accessibility or photometric calculators. Every input is visible and editable so assumptions stay explicit.
40 × 20 m playing court with editable 2 m planning allowance.
CALCULATOR 01
Facility footprint
44 × 24 mconcept precinct rectangle
1056 m²concept footprint
1playing units
CALCULATOR 02
Surface planning quantity
800 m²playing-area total
840 m²planning quantity incl. allowance
This is area arithmetic only. Roll widths, tile modules, seams, line systems, perimeter details and manufacturer-specific waste factors can change the final order quantity.
CALCULATOR 03
Spectator concept
50seats per row concept
27 mapproximate row length
Not a code or sightline calculation. Final rows, aisles, vomitories, accessible positions, guards, rake and egress must be developed by the project team.
BUILDER 04
Lighting brief
01Confirm the sport and exact competition level.
02Define the playing area plus spectator, camera and officials zones.
03Coordinate luminaire locations with structure, roof services, poles and maintenance access.
04Control glare for players, officials and spectators.
05Confirm local electrical, emergency-lighting and spill-light requirements.
06Define training, match and reduced-energy operating modes where controls support them.
NEXT STEP
Carry the assumptions into the technical and specification workflow.
Goal zones, benches, officials and spectators require a larger operational footprint. Verify the current IHF competition brief.
PRIMARY GOVERNING REFERENCES
Use Apollo to navigate the technical problem—then verify the rule at source.
We link to the governing organisation rather than republishing whole standards. Rules, manuals, approval lists and competition requirements change.
Reference review date: 4 October 2026. Governing-body content remains owned and controlled by the relevant organisation. Apollo's summaries are planning aids, not substitutes for the current official rules or local professional advice.
CITE THIS RESOURCE
Handball Facility Technical Centre
- Publisher
- Apollo NZ Global
- Edition
- 2026.1
- Reviewed
- 4 October 2026
Apollo NZ Global. Handball Facility Technical Centre. LUTHVAR Global Sports Technical Library, 2026.1. https://apollonzglobal.com/handball-systems/facility-technical-centre
Technical reference & source policyPROJECT-SPECIFIC REVIEW
Turn the technical reference into a controlled handball project brief.
Apollo remains supply-only. Local design, foundations, civil works, installation, statutory approvals and professional sign-off remain with the appropriate project parties unless a specific support item is expressly included.