Skip to main content
Apollo NZ Global

Built Intelligence · Architecture & Specification · Architecture & specification

Coastal Steel Structures: Galvanising, Coatings and Long-Term Corrosion Protection

Coastal architecture is demanding on steel. Salt carried by wind can settle on metal surfaces, while dampness, condensation and frequent wetting can accelerate corrosion where protective finishes are damaged or poorly detailed. The problem is not that steel cannot be used near the sea. It is that corrosion protection must be deliberately matched to the exposure, design life and maintenance arrangements.

Apollo NZ Global EditorialPublished 2026-11-19Project intelligence
Final product selection, technical documentation and local approval requirements are assessed for each project.
Apollo architectural steel and aluminium metalwork systems illustrative image

Existing Apollo architectural metalwork illustration; does not establish coastal corrosion performance.

01

Project context

For pergolas, carports, screens, public shelters and other structural elements, specifying a paint colour is not the same as specifying a protection system. The buyer needs credible information on the steel substrate, fabrication, protective process, fasteners, environmental assumptions and planned inspection.

02

Understand the actual exposure

Distance from the water is relevant, but it is not the only factor. Prevailing winds, surf conditions, sheltering by other buildings, local humidity and the frequency of salt deposition can change the corrosive environment. Two sites in the same coastal town may face different maintenance demands.

A competent designer should assign the applicable exposure conditions and choose the protection system accordingly, using relevant standards and manufacturer evidence. Do not use a generic 'marine grade' label as proof that every steel component and fixing will last an expected period.

03

What hot-dip galvanising does

Hot-dip galvanising adds a zinc-based protective layer to suitable steel components. It can provide useful corrosion protection in many environments, but its suitability and service life depend on actual coating quality, steel details, exposure and maintenance. Galvanised steel is not immune to degradation.

Fabrication details should be considered before galvanising. Hollow members, drainage and venting, weld quality and the handling of parts all affect the process. Designers should also consider visible finish expectations, connection tolerances and whether later cutting or site welding may disturb the protective layer.

04

When a duplex finish may be considered

A duplex system combines galvanising with a compatible paint or coating system. It may provide a useful way to meet appearance and durability objectives when properly specified and applied. However, coating adhesion and system compatibility cannot be assumed simply because both layers are present.

Surface preparation, pretreatment, environmental conditions, coating thickness and quality control matter. Ask the fabricator for a defined system and relevant records, rather than settling for the phrase 'galvanised and powder coated' without a coating schedule.

Apollo architectural metal components including steel brackets screens and finishing details
Existing Apollo metalwork detailing image; coating and galvanising choices require manufacturer evidence.
05

Design details can matter more than colour

Water traps, crevices and inaccessible interfaces may accelerate corrosion regardless of how attractive the external coating appears. Details that allow drainage and cleaning are easier to maintain. Connections should avoid unnecessary dissimilar-metal contact or include appropriate measures to manage galvanic effects.

Pay attention to post bases, roof gutters, concealed connection plates, welds and cut ends. A fully coated visible face can hide a poorly protected underside. Maintenance access should be designed in rather than left for the building owner to solve later.

06

Fasteners are part of the system

A corrosion-resistant frame can still develop problems if bolts, screws, anchors or washers are inappropriate for the environment or incompatible with adjoining materials. Specify the complete fastening system, including grades, isolation requirements and the relevant connection and anchor design.

Do not assume 'stainless steel' is a single universal specification. Grades and conditions differ, and stainless fasteners can also experience corrosion in aggressive environments. The engineer and corrosion specialist should review the selected combination.

07

Be clear about design life and warranties

New Zealand Building Code Clause B2 Durability sets minimum durability obligations for applicable building elements. The relevant required period depends on the element and compliance pathway. A commercial product warranty is not the same thing as meeting a building-code durability requirement.

Ask for documents describing the intended service environment, coating process, expected inspection, maintenance and any performance evidence used in the specification. A warranty may have strict environmental or care exclusions. Do not market a nominal coating warranty as a guaranteed structural life.

08

Specify inspection and repair early

Salt and grime should be removed in a manner appropriate to the finish, and exposed areas should be inspected on a practical schedule. The maintenance plan should explain how coatings are checked, how mechanical damage is repaired and when specialist attention is needed.

Some locations are hard to reach safely, especially high roof beams and hidden gutters. If a maintenance method relies on cranes or specialist access equipment, the lifetime cost can be significant. Include those access needs in the planning discussion.

09

Understand the limits of residential steel kits

Apollo's current ORZENZA manual residential steel pergola range is intended for suitable standard inland New Zealand residential conditions, not for coastal or severe exposure applications. Buyers should not infer that a generic discussion of coastal steel protection makes these kits suitable for marine sites.

For a coastal project, source a separately verified architectural solution with the necessary structural design, corrosion specification, manufacturer permission and local professional review. The right product may be an appropriately specified aluminium system, engineered steel assembly or hybrid arrangement.

10

A practical coating specification enquiry

Give the supplier the site location and environmental context, intended function, relevant photographs, design life, finish preferences, structural drawings where available, expected maintenance resources and critical interfaces. Ask for the coating system specification, preparation, fabrication method, fastening schedule and supporting records.

A technically strong quotation makes assumptions explicit. It should also state who is responsible for site welding, touch-up, transport damage, inspection and ongoing care. The cost of protection should be considered alongside future accessibility and replacement.

11

Frequently asked questions

Is galvanised steel rust-proof? No. Galvanising protects steel, but its performance depends on quality, exposure and maintenance.

Does powder coating alone make steel coastal-ready? Not necessarily. The complete system and substrate preparation need verification.

What is a duplex system? A coordinated galvanising-plus-coating protection approach, not just two unspecified surface treatments.

Can ORZENZA residential steel kits be used at the beach? Current residential steel positioning excludes coastal exposure; a separately qualified system is required.

12

The corrosion category must reflect the actual site

Corrosion protection is often specified through recognised environmental classifications and related coating requirements, but a site cannot be classified by distance from the shore alone. Salt spray, wind direction, shelter, moisture retention and local industrial contaminants can create different conditions over short distances. The appropriate professional should determine the exposure assumptions, applicable standard and required durability pathway for the structure. When requesting quotes, provide photos, site location, use and maintenance expectations and ask each bidder to state which conditions its proposed system is designed to withstand. A vague term such as 'coastal grade' without associated evidence makes competing coating specifications difficult to evaluate and creates confusion if deterioration occurs later.

13

Explore design life and access together

A protective coating is most valuable when the structure can be inspected and serviced during its intended life. For a high canopy, the owner may need specialist access to check top surfaces, hidden connections and gutters. A rooftop steel screen over a busy promenade can be difficult to isolate for maintenance. These practical issues should be recorded while the structure is designed. The engineer and coating specialist should connect the required durability period with the planned maintenance intervals and access method. Avoid promising a structure will remain untouched for decades merely because a coating has a published nominal service-life estimate. A design with maintainable connections may offer better value than one with inaccessible but attractive concealed details.

14

Demand a real coating specification

A meaningful coating schedule describes the steel substrate, preparation, protective process, compatible coating layers, key thickness or quality controls where appropriate, treatment of welds and cut edges, handling, and site repair procedure. The level of detail should reflect the proposed system and the applicable standard. If hot-dip galvanising is used, the fabricator should account for component geometry and process suitability. If painting follows galvanising, the system must be specified for proper adhesion and environmental exposure. Ask how the coating will be inspected and recorded before delivery. The terms 'zinc', 'galvanised', 'powder coated' and 'duplex' should not be presented as interchangeable treatments with equal performance.

15

Pay attention to geometry and water traps

Structural details can determine whether a protective finish survives. Horizontal recesses and closed pockets may retain salty water, while poorly sealed joints can be difficult to wash or inspect. Designers should consider how rainwater leaves the frame and whether drainage openings compromise other performance requirements. At post bases, keep water from collecting around anchors and interfaces where feasible. At roof edges, resolve gutters and downpipes so overflow does not repeatedly wet vulnerable connection zones. Even the best coating needs geometry that supports its intended function. This is a reason to engage corrosion and structural expertise before fabrication drawings are finalised, not merely to add paint thickness after a problem develops.

16

Consider fasteners and mixed materials as a system

The steel member, bolts, washers, anchors and adjacent aluminium or stainless steel pieces may have different electrochemical behaviour. The engineer should specify compatible materials and suitable separation where needed, with allowances for water, movement and access. A familiar phrase such as 'stainless fixings' is insufficient to establish suitability for every marine environment. Different grades, surface conditions and crevices can alter performance. For replaceable public-space components, the fastener strategy should also make future disassembly practical. The supply schedule should list the relevant hardware and any special isolation components, rather than leaving installers to substitute whatever fastener is available on site.

17

Manage transport and site damage before acceptance

A coating can be damaged during packaging, loading, unloading, lifting or on-site welding. The procurement contract should explain how goods are handled, what inspection occurs on arrival and how damage is documented. Some repair processes may require specific preparation and compatible materials, while major damage may justify factory attention rather than a simple field touch-up. The party responsible for those decisions should be named before delivery. For overseas projects, photographs, packing records and damage reporting are especially useful because returning large steel components may be impractical. A well-executed factory finish is only one part of the corrosion-control chain; transport and installation quality matter too.

18

Use a coastal procurement evidence register

Create a short register with columns for environment classification, design life assumption, selected coating system, hardware schedule, relevant technical evidence, inspection responsibility, care instructions and open issues. Attach manufacturer records or specialist advice where available. Mark unverified claims clearly rather than copying them into marketing. This helps the buyer distinguish a genuinely documented coastal project product from a standard inland kit that happens to use steel. Apollo's current ORZENZA entry steel products are not positioned for coastal applications, so they should remain outside that eligibility path. The register also supports local approvals and gives asset owners a clearer maintenance record after handover.

19

Include a whole-life corrosion budget

Initial finishing cost is not the whole economic picture. Estimate inspection, washing, repair, access equipment, potential replacement components and disruption to the occupied site. A highly exposed structure may justify a different finish or geometry if it reduces these future interventions, but claims about savings should be supported by realistic assumptions. The coating supplier's warranty must be read alongside the required maintenance and local environment. Where several architectural alternatives exist, compare them on a consistent design life and site exposure rather than contrasting a protected steel system with an aluminium option that has undefined coating and hardware details. The best choice is evidence-based and maintainable.

Move from intelligence to project

Apply the thinking to the actual brief.

Open Architectural Metalwork Systems Send a project brief
FOR ESTABLISHED TRADE COMPANIES

Do you supply architectural façades to commercial projects?

Established façade contractors, specialist cladding dealers and architectural distributors can discuss model-specific wholesale product supply for their own customers, subject to technical and territory review.

Read our technical wholesale sourcing checklist

Supply-only B2B · No automatic agent appointment or exclusivity · Product and country eligibility checked individually
Project