Example specifications from published manufacturer information for planning discussions. These are reference configurations, not a stock schedule or fixed customer quotation. Apollo confirms the selected model and engineering details before supply.
How to use this information
The dimensions below are manufacturer-published examples, not guaranteed dimensions for another project. Capacity, operation, final drawings, availability and applicable test evidence must be checked against the chosen system and destination.
Use the model names as reference points when discussing options for your venue. Example row counts are not automatically interchangeable with the available depth of your hall.
Reference
Seating type
Published rows
Application
BL-STE-07-CB
Upholstered folding
7
Indoor multipurpose hall
BL-STE-08-CA
Plastic seating
4
Compact indoor venue
BL-STE-09-CB
Upholstered folding
9
Larger indoor venue
BL-STE-10-CF
Plastic seating
10
High-capacity indoor venue
BL-AL-04-CN-02
Aluminium bench tiers
4
Portable sideline seating
Reference information only. Seat count, layout and any approvals are specific to the final quotation and project.
SUPPLIER-DRAWN REFERENCE · 21 MAY 2022
Six-tier, approximately 15 m retractable seating example
A two-page SMART Group general-arrangement drawing titled “6层15m伸缩看台-高靠背双通道” shows a six-tier retractable bank with high-back seats and two aisles. The drawing labels the layout as 160 seats, with the following example dimensions. It is a historical supplier drawing, not an approved design for any specific project.
Seats
160
Nominal seating width
15,000 mm
Overall drawing width
15,393 mm
Extended depth
5,000 mm
Retracted depth
1,800 mm
Retracted height
2,722 mm
The dimensioned view also labels 900 mm longitudinal intervals, a 300 mm rise, 500 mm seat spacing and an 800 mm aisle-related dimension. Final interpretation, clearances, aisle widths and measured envelopes must be confirmed with a current dimensioned drawing.
Project qualification: A venue reporting 15 m frontage and 5 m available depth is not automatically suitable: the drawing's overall width is greater than 15 m, and access, egress, slab capacity, circulation and local approvals remain to be resolved. Request a project-specific revision rather than treating this example as a fixed-size kit.
Additional seating formats documented in SMART's 2025 catalogue
The supplied SMART Retractable Bleachers 2025 brochure contains reference photography and layouts for upholstered folding-seat banks, plastic-seat telescopic stands, compact movable and 360° movable bleachers, benches, corner configurations and multi-bank arena seating. This provides better reference material for product-family selection than the earlier generated model illustrations.
Brochure pages 3–6 show folding upholstered-seat configurations; pages 10–12 show movable retractable systems; pages 13–23 show further bench, corner and plastic-seat formats. Brochure examples are not proof of currently available options, certifications or exact dimensions for a customer quotation. Manufacturer photography and reproduced drawings should be cleared for Apollo website reuse before publishing them as product media.
Request drawings and manufacturer confirmation
To turn a reference into a project proposal, include the venue location, required seating capacity, clear frontage, maximum deployed depth, stored space, floor or foundation information, preferred operating method and delivery deadline. Apollo will seek suitable general arrangement drawings, relevant structural evidence, seat layout, access provisions and an itemised supply scope from the manufacturer.
Drawings and supporting documents depend on the selected model and supplier response. No unverified certification or final seating capacity is promised.
Exact product photograph to be confirmed with the selected configuration
INDOOR TELESCOPICReference: BL-STE-07-CB
Seven-row upholstered retractable seating
Operating format
Electric listing; another manufacturer listing says manual/electric
Published example geometry
One published example: 8,100 × 6,022 × 3,122 mm; 7 rows; row depth 900 mm; rise 300 mm
Published material details
Powder-coated steel; 18 mm melamine multilayer plywood; folding upholstered seats
Additional manufacturer claims
Published model sheet includes 50 × 100 × 3.5 mm pillars, 50 × 220 × 3 mm beams, 500 mm seat centres and ≥5 kN/m² claimed loading.
Confirm before quoting: Verify actual quoted row count, operation, capacities and supplied load test. Different manufacturer pages show inconsistent capacity figures.
Exact product photograph to be confirmed with the selected configuration
ALUMINIUM BLEACHERSReference: BL-AL-04-CN-02
Four-row portable aluminium bleachers
Operating format
Non-powered portable stand; mobility details to confirm
Published example geometry
Manufacturer references four rows and a six-metre aluminium bleacher configuration.
Published material details
6061-T6 aluminium alloy; 50 × 50 × 5 mm structural member listed; anodised aluminium seating
Additional manufacturer claims
Published model record identifies aluminium alloy and seat material.
Confirm before quoting: Request manufacturer GA drawing, actual capacity, movement mechanism, guards, structural test report and exact packaged dimensions.
Provide the venue plan, available width and deployed depth, target spectators, frequency of deployment and required delivery date. Manufacturer drawings, assembly information, local compliance requirements and freight planning form part of the project review. Apollo NZ Global supplies equipment only; site installation remains with the appointed local team.
Essential site functions work without analytics. With your permission, Apollo uses analytics to understand which products, guides and project pathways are useful. Analytics stays off until you allow it.