RHELGAN · SOURCE INTAKE

Source-Water Intake & Transfer

Source-side pumping, screening and transfer pathways that move raw water from bore, surface, delivered or bulk sources into storage and treatment without treating the intake as an invisible project interface.

Start project brief Technical Centre

01SOURCE

02SCREEN / PROTECT

03INTAKE PUMP

04TRANSFER MAIN

05RAW STORAGE

06TREATMENT

Where it fits

Applications that benefit from this pathway.

Surface-water projectsRiver and lake abstractionBore transferDelivered-water receivingBulk tanker fill / discharge pointsRemote community systems

Selection factors

Define these before equipment is fixed.

Source level and variability

Source yield

Intake protection

Suction conditions

Transfer distance and head

Raw-water solids

Pump redundancy

Access for cleaning and maintenance

Specification controls

Keep the public pathway useful without turning planning data into guarantees.

Intake design is source-specific and may require environmental or abstraction approvals.

Surface-water intakes need debris, sediment and seasonal-level review.

Pump suction conditions and cavitation risk are checked before equipment selection.

Raw-water transfer pipework and civil works remain defined project interfaces unless included in the written scope.

Connected pathways

Move from the capability into the right project configuration.

Bore & Groundwater Systems

Review bore yield and groundwater pumping.

Open pathway

Water Treatment Systems

Connect intake conditions to treatment design.

Open pathway

Pump & Pressure Systems

Select transfer duty from actual head and flow.

Open pathway

Working resources

Carry this section through design, procurement and handover.

Source-Water Review

Structure source, testing, seasonal reliability and treatment questions before equipment is selected.

Open review

Demand & Storage Planner

Turn demand and storage autonomy into a transparent planning range.

Open planner

Specification Template

Use one controlled schedule for storage, treatment, pumping, controls and project interfaces.

Open template

Responsibility Matrix

Separate supplied equipment from civil works, pipework, power, approvals and operations.

Open matrix

Installation & Commissioning

Plan site readiness, assembly, cleaning, testing and water-quality verification.

Open commissioning

Operations & Maintenance

Define routine checks, consumables, spares, alarms and operator ownership.

Open O&M

Project note

The water system starts at the source, not at the treatment skid. Intake protection, pump duty, access and source variability can materially change the entire downstream design.

Final equipment, material, capacity, certification, drawings, performance and commercial scope are confirmed against the exact project configuration.

RHELGAN · WATER STORAGE & SUPPLY SYSTEMS

Use the project brief to turn the requirement into a technical handoff.

Start Water Project Brief Upload project documents