FÍSVOR · SPECIALIST DISPLAY SYSTEMS

Transparent & outdoor interactive LED

Project-led display families for architectural glass, building façades and interactive public spaces. These are candidate product specifications from supplier literature—not verified compliance approvals.

Indoor transparent LED

Architectural atriums, retail glazing, exhibitions and indoor suspended media. Aluminium-profile 75 mm cabinet depths; ≥5000 nits and IP30 are manufacturer-stated.

Show preliminary review priorities

Model	Pitch (mm)	Brightness	Light transmission	IP claim	Cabinet width × height (mm)	Weight	Review
P2.6–5.2	2.6–5.2	≥5000 nits	≥65%	IP30	1000 × 1000 / 1000 × 500	10 / 5 kg	Current documentation required
P2.8–5.62	2.8–5.62	≥5000 nits	≥70%	IP30	1000 × 1000 / 1000 × 500	10 / 5 kg	Current documentation required
P3.15	3.15	≥5000 nits	≥55%	IP30	1000 × 1000 / 1000 × 500	10 / 5 kg	Current documentation required
P3.91–7.82	3.91–7.82	≥5000 nits	≥75%	IP30	1000 × 1000 / 1000 × 500	10 / 5 kg	Current documentation required
P3.91	unresolved	≥5000 nits	≥75%	IP30	1000 × 1000 / 1000 × 500	10 / 5 kg	P3.91 title but 3.15 mm in the parameter table

All values are manufacturer-stated. Preliminary review priorities are not product approvals or guarantees. Transparent LED luminosity, transmission, cabinet loading, wind design and control architecture must be checked for the specific configuration.

Transparent-display project checks

Verify daylight visibility and transparency using the exact installation geometry
Confirm physical module dimensions, suspension, wind loads and structural connections
Check IP30 indoor versus IP65 outdoor certification boundaries
Verify façade/fire-safety approvals, electrical isolation and service access
Confirm the contradictory P3.91 and P31.25 model identifiers

Outdoor floor project checks

Request independent IP67 testing for the completed floor assembly
Verify wet slip resistance, static and dynamic load testing
Check drainage, fall protection, electrical supply and thermal management
Validate the actual motion-sensing hardware and interactive control software
Obtain written five-year warranty conditions and exclusions

Next step: technical project specification

Apollo provides supply-only project systems. Local installation, engineering, regulatory approval, site works and final commissioning are coordinated by the appointed project team.

LED specification centre →Start project brief →LED project planning →