Skip to main content
Apollo NZ GlobalApply as a reseller
Trade sourcing knowledge · Sports surfaces and venues

Sports Facilities & Court Flooring: Wholesale Buyer Guide

Courts that look similar can need different systems, substrates and installation methods. This guide helps specialist sports distributors, court builders and facility suppliers prepare accurate purchasing information before approaching a wholesale source.

For: Sports-surface distributors, court builders, school/club suppliers, event flooring companies and commercial sports-facility procurement teams.Independent wholesale supply · No automatic appointments
What matters first

Start with the sport, facility use and existing base. Compare product systems only after identifying indoor/outdoor conditions, player needs, drainage, maintenance and the performance evidence the actual project requires.

01 / Order readiness

Four steps before requesting supply.

01

Understand the venue

Sport, schedule, user groups and permanent or portable use

02

Inspect the base

Surface condition, moisture, drainage, flatness and site access

03

Choose the system

Differentiate modular tiles, rolls, resilient floors and specialist finishes

04

Build the supply brief

Dimensions, standards, accessories, documentation and installation scope

PART 01

Define the sporting programme

The sport and facility operating plan drive the purchasing decision.

Record which sports the venue will support, competition versus community use, booking frequency, expected footwear, maintenance regime and whether the floor remains installed permanently. Basketball, netball, futsal, badminton and pickleball place different demands on surfaces, line markings, ball behaviour and player movement.

A new school hall and a touring event venue should not be specified from the same single-page floor description. A multi-use school floor may prioritize durability and programme flexibility; an event surface may prioritize deployment time, portability, storage and protection of the underlying floor.

Before recommending a court system, check any stated federation or competition requirements against the current rules for that level of play. A supplier's certification for one system is not a blanket approval for every product or venue.

Questions to resolve

  • Sport or sports and competition level
  • Indoor, outdoor or temporary venue
  • Frequency of use and changeover requirements
  • Relevant line markings and playing dimensions

A product certificate or federation logo does not certify an entire installed facility or every model in a manufacturer's catalogue.

PART 02

Audit the existing base and drainage

A successful sports surface depends on the condition and suitability of what supports it.

Document whether the substrate is concrete, asphalt, timber, synthetic turf, compacted material or another construction. Identify cracks, level changes, ponding, movement, contamination, moisture issues and access restrictions. Photos are useful but do not substitute for a qualified inspection where one is required.

Outdoor courts require a drainage strategy for the base and playing layer. Interlocking tiles may permit some water movement through or between tiles but cannot remedy a base that traps water or moves excessively. Resilient coatings and rolled systems have their own substrate and bonding conditions.

Do not assume direct installation over grass is acceptable. Vegetation, soil movement, moisture and uneven support may compromise the system. The correct base preparation must be determined for the selected product and site.

Questions to resolve

  • Base material, dimensions and condition
  • Drainage route, falls, moisture and climate exposure
  • Preparation and repair scope
  • Access for deliveries and installation teams

The supplied surface is only one part of a functional court; base design and installation remain separate project responsibilities.

PART 03

Compare the surface families without false equivalence

The trade buyer should be able to explain why each product works—or does not—for the intended venue.

Modular polymer tiles are often considered for outdoor multi-sport, recreation and some portable applications. Their attachment system, expansion allowance, UV properties, ball response and underlying substrate requirements must be checked model by model.

Sports vinyl, cushioned systems, timber and other indoor products differ in construction, installation, upkeep and sporting performance. Portable roll-out systems add questions about sections, seam treatment, handling equipment, safe storage and repeat setup. Acrylic and other site-applied outdoor surfaces depend on base and installation requirements.

Compare documented performance measurements, operating conditions and total installed scope. Resist judging products only by nominal thickness or surface colour. Two floors of the same thickness can have very different constructions and verified performance.

Questions to resolve

  • Surface category and verified performance measures
  • Substrate and installation compatibility
  • Maintenance and expected operating environment
  • Portability, storage or replacement needs
PART 04

Specify the full facility, not just the floor

A usable procurement brief often spans equipment and infrastructure categories.

Record court size, run-off zones, circulation, accessible routes, spectator areas, lighting requirements, goals or posts, nets, storage and any relevant safety interfaces. The playing lines alone do not define a complete safe venue. Use the applicable sport and project standards for dimensions and safety zones.

For multiple courts or a school complex, map how sports share space. Consider lighting placement, retractable or removable equipment, acoustic needs, divider curtains, floor protection, maintenance access and simultaneous bookings. Coordinate the court surface with equipment anchoring or sleeves before construction.

Where facility packages are purchased through different suppliers, maintain a responsibility matrix: flooring, equipment, lighting, structure, site works, commissioning and operating documentation should have clearly named owners.

Questions to resolve

  • Court and run-off dimensions
  • Separate equipment schedule and fixing requirements
  • Lighting, storage and user circulation
  • Responsibility matrix for complete venue scope

Do not treat the sport's marked rectangle as the full minimum space required for safe play.

PART 05

Request evidence for the exact system

A technical pack is useful only if it clearly identifies the goods on the purchase order.

Ask for current model-level technical sheets, construction details, available performance test results, care and installation guidance, colour options and packaging details. Check that certifications apply to the quoted item, not a related product or a supplier's entire range.

Public-sector buyers, schools and federated competitions may set their own documentation and procurement standards. The local designer, authority and client decide how the available supplier evidence is used and whether independent testing, inspection or approvals are necessary.

Where installation occurs locally, identify who checks the base, signs off preparation, lays the surface, marks courts, tests the result where required, and trains the venue team in care and safe use.

Questions to resolve

  • Model-specific testing and documentation
  • Current product dimensions and packaging
  • Local project requirement matrix
  • Installer, marking and handover scope
PART 06

Prepare an order-ready sports wholesale enquiry

A distributor's best first message is short, specific and tied to its customer channel.

Tell Apollo your business country, existing sports customer channels, primary surface category and intended end-user type. State whether you already build courts, supply schools, equip clubs or manage stadium projects. A single live project can be more informative than an unverified claim to serve a national market.

Include sport, approximate surface area, indoor/outdoor use, known substrate, delivery location, timeline and any procurement or certification questions. Where needed, attach sketches, court schedules, equipment lists or a preliminary bill of quantities.

Apollo supplies accepted product ranges to eligible trade businesses. Local surveying, base works, installation, statutory approvals and venue operations are coordinated by the buyer and its locally competent professionals. Wholesale approval and territory permissions are considered individually.

Questions to resolve

  • Registered company and main sports-market customers
  • Sport, surface type and project size
  • Destination and planned purchase date
  • Technical evidence and local support requirements
02 / Prepare the first approach

What a qualified buyer should provide.

Keep your first application concise. Apollo will request the detailed technical and commercial information when the product and destination are suitable for further review.

Send your wholesale application
  1. Registered business name, country and reliable contact
  2. Existing customers, sales channel and the product lines you already know
  3. Your main wholesale product category and target destination
  4. Current order or project stage, if known
  5. Who will import or coordinate local receiving and after-sales support
  6. Any technical or manufacturer documentation question you need resolved
03 / Common trade questions

Answers before you apply.

Can a distributor buy flooring for one school or club project?

Project-led wholesale purchasing may be discussed if the selected product, destination and commercial scope are approved.

Can all sports flooring be installed over the same base?

No. Base suitability varies by product and site. Substrate, moisture, drainage, flatness and preparation need separate assessment.

Does a certified flooring product certify the completed court?

No. Product-level evidence does not automatically establish a completed installation's compliance or sporting approval.

Do you install courts in the distributor's country?

Apollo operates on a wholesale supply-only basis. The local buyer arranges qualified site contractors and approvals.

Next resources

Explore the related sourcing questions.

Work with Apollo as an independent trade buyer.

Your company manages its customers and resale pricing. Apollo reviews the specific product, location and wholesale scope before accepting orders.

Introduce your company Read the full wholesale programme
Project