Start Project BriefApollo Wellness Systems · Sauna Heating
Apollo sauna-heating pathways focus on the heater, controls, electrical configuration and room interfaces behind a properly designed sauna. The current qualification programme spans compact residential equipment through large commercial heaters, while exact model suitability, room volume and certification remain model-specific.
Product family architecture
These are project-selection families rather than fixed public model codes. Exact output, room-volume range, controller, supply voltage, clearances and certification are confirmed against the selected equipment.
Private residential
Lower-output electric heater pathway for compact private sauna rooms, selected around room volume, glazing, insulation, ventilation and the available electrical supply.
Homes · villas · lodges
Mid-range electric heating for larger private sauna rooms and premium accommodation where control quality, room finishes and repeatable operation matter.
Hotels · resorts · gyms
Commercial-oriented heater pathway for repeat-use sauna rooms in hospitality, health-club, aquatic and sports settings.
High-volume thermal rooms
Current supplier qualification reaches 36 kW per heater for larger commercial sauna applications. Final room-volume range, controller architecture and destination approval remain subject to the exact model evidence.
Product families establish the selection pathway first. Exact model, electrical ratings, certificates, capacities and performance data are confirmed only after Apollo has matched the current technical evidence to the quoted configuration.
Specification framework
Apollo treats wellness equipment as part of a real project: electrical load, water, ventilation, drainage, servicing, user volume and destination requirements are resolved before the final supply configuration is quoted.
Heater output is matched to the internal room volume, glazing, insulation, room construction, ventilation and expected operating pattern.
The current qualification programme extends to 36 kW per heater, but the exact available outputs and room-volume ranges remain model-specific.
Supply voltage, frequency, phase, circuit protection and connected load are confirmed for the exact heater and destination.
Temperature, timer and supported remote-control functions are selected from the compatible controller architecture.
Heater-to-bench, wall, guard and ceiling clearances are taken from the final installation documentation rather than assumed from a generic family.
Air inlet, exhaust position and natural or mechanical ventilation requirements are coordinated with the selected heater and sauna layout.
Timber lining, insulation, vapour control, benches, guards, doors and glazing are coordinated by the project team around the heater requirements.
Current supplier qualification includes CAD / DWG drawings, wiring diagrams and technical data sheets; exact documents are matched to the quoted model.
Project capability
Exact equipment varies by project. These describe the capability areas reviewed for the category rather than fixed claims about every model.
Electric heater and controller pathways for bespoke residential sauna rooms rather than only prefabricated cabins.
Guest-facing sauna rooms coordinated with thermal suites, pools, steam, cold plunge and relaxation zones.
Repeat-use sauna heating with operating duty, cleaning, controls and service access included in the project review.
Higher-output heater pathways for larger rooms and higher use, subject to final electrical and model-specific verification.
Room size, electrical configuration, heater position, controller location, clearances and ventilation are brought into one technical handoff.
Private-label capability is under supplier qualification for selected equipment, documentation and packaging; final branding scope is confirmed before release.
Electrical + project compliance
Current manufacturer statements indicate single- and three-phase equipment and regional certification pathways. Apollo will not represent a heater as certified for a destination until the current certificate, covered-model schedule and quoted configuration have been checked.
Wellness · technical evidence
Wellness systems combine electrical, water, heat, ventilation and user-safety interfaces. Apollo uses the family page to define the project pathway, then the quoted model must be matched to the current technical, electrical and maintenance evidence required for the destination.
Confirm: Model identity, dimensions, materials, insulation/build-up, capacity and the exact options included in the quote.
Boundary: Family-level capabilities should not be treated as specifications for every future or alternate model.
Confirm: Voltage/frequency, connected load, heater/chiller/pump/control loads, ingress protection where relevant and exact model approval evidence required for the destination.
Boundary: Electrical approval is model- and configuration-specific and does not transfer automatically across variants.
Confirm: Fill, circulation, filtration/treatment, drain/waste, overflow and water-quality requirements for wet systems.
Boundary: Local plumbing, backflow, sanitary and discharge requirements remain destination-specific.
Confirm: Heat output/rejection, ventilation, clearances, insulation, humidity/condensation and room/environment assumptions.
Boundary: Indoor sauna, steam, hot-water and chiller installations can impose different building-services requirements.
Confirm: Base/support, access, lifting/handling, service clearances, connection points, enclosure/room interfaces and local trade requirements.
Boundary: Supply-only scope does not automatically include site preparation, installation, commissioning or statutory approvals.
Confirm: Expected users, daily cycles, target temperatures, recovery/commercial operating pattern and cleaning/turnover requirements.
Boundary: Residential and high-throughput commercial duty may require different equipment selections.
Confirm: Cleaning, water-care/filter schedules, descaling, chiller/heater servicing, ventilation care and replacement consumables/parts.
Boundary: Service intervals and consumables follow the exact supplied equipment and water/environment conditions.
Confirm: Current product warranty, component warranty, exclusions, maintenance conditions, manuals and required certification/test records.
Boundary: Certification evidence must identify the quoted model or applicable configuration.
Electric sauna-heater and control pathways for private residential, hotel, resort, gym, aquatic, sports and commercial wellness projects. The current qualification programme extends to 36 kW per heater and includes single- and three-phase equipment pathways. Exact output, room-volume range, voltage, phase, controller, clearances, installation documentation and certification are verified against the selected model before release.
Residential · Hospitality Resort · Commercial Development
Standard Model Pathway
This snapshot summarises the current Apollo product record. Final configuration, interfaces, engineering, certification and destination requirements are confirmed against the project.
Project planning
Configuration, technical evidence, interfaces, exposure or destination requirements need product-specific review before the final supply package is confirmed.
Final engineering, testing, approvals and destination requirements are confirmed for the actual project where applicable.
Connected project pathway
See how sauna heating systems fits within the wider Apollo product and project system.
Open pathway Parent rangeExplore the wider rangeSee how sauna heating systems fits within the wider Apollo product and project system.
Open pathway TechnicalTechnical resourcesUse specifications, guides and technical documents to plan sauna heating systems against the real project brief.
Open pathway Project briefStart a project enquirySend dimensions, application, site context and destination so Apollo can confirm the right sauna heating systems pathway.
Open pathwayNo current public document is registered against this exact page yet. Tell Apollo what the project needs and the team can review the current product/configuration-specific information available.
Relevant project sectors
Project brief
Share the intended application, available space, expected user volume, electrical supply, water and drainage information, drawings and project stage. Apollo can then narrow the correct system and exact configuration for review.