Starting room / fixture schedule
Housing · Apollo Standard Configuration · H3-72
Concept standardManufacturer confirmation pending
Three-Bedroom Family Home
Standard three-bedroom family dwelling using four joined wide modules.
Planning platformApollo wide-module concept grid · nominal 6.0 × 3.0 m planning modules; final manufacturer mapping may use long-format modulesModule countConcept: 4 joined planning modulesPlanning areaApprox. 72 m² gross planning footprint
Intended use
What this configuration is for.
Permanent family housing, remote-community programmes, social housing and resilient reconstruction.
Standard manufactured supply
What the factory package can start from.
Four structural modulesResidential insulated envelopePartitions and finishesKitchen and bathroom pathwaysDoors and windowsElectrical / plumbing pathwayLocal / project scope
What stays outside the base manufactured package.
FoundationExternal utilitiesDeck / veranda unless includedSite worksResidential / planning approvalsInstallation / commissioningBefore commercial freeze
What still has to be confirmed with the selected manufacturer.
Exact external + internal clear dimensionsStructural module joining / opening limitsDoor + window positions and standard sizesWet-area floor, drain and service interfacesElectrical / plumbing factory-completion scopeFire, thermal, wind / seismic evidence as applicableCoastal / corrosion specification where requiredPacking, container quantity, weights and lifting points
Configuration rules
Standard first. Project-specific where necessary.
H3-72 is the core medium-family programme unit.
A design-stage manufacturer precedent now exists at approximately the same overall floor area using two long-format module bands; this is not yet treated as a direct H3-72 match.
Exact configuration may use fewer long-format modules if the standard factory plan is technically and commercially better.
Apollo is supply-only. Final structure, foundations, anchoring, fire, accessibility, services, installation, local engineering and statutory approvals remain project- and destination-specific.
Use H3-72 in a real project
Send the quantity, destination and project requirements.
The standard configuration gives us the starting module count and room schedule. We then confirm the manufacturer platform, technical requirements, local interfaces, documentation, freight and quotation basis.