TIRREN · SPECIFICATION STARTER
Resort Project Systems
Use this as a controlled starting point for consultant coordination, tender preparation and project review. Replace planning language with exact project/system information before procurement.
APOLLO NZ GLOBAL · WHOLESALE & PROJECT SUPPLY
TIRREN
Resort Project Systems
- Project
- ________________
- Destination
- ________________
- Status
- Concept / tender starter
- Review
- 05 Oct 2026
01
PROJECT INTENT / TECHNICAL INPUTS
- Hotel/resort type, key count and project stage
- Room/area schedules and quantity matrix
- Material/finish/colour requirements
- CAD/shop-drawing/BIM requirements
- Mock-up room / sample / approval process
- Wet-area, UV/coastal and cleaning-chemical exposure
- Packaging/room-by-room labelling and site storage
- Manufacturing/phasing/freight/installation responsibility
02
PERFORMANCE / SPECIFICATION CLAUSES
- Room/area scope schedule
- Material and finish performance
- Dimensions/tolerances
- Wet-area/environment exposure
- Samples/mock-up approval
- Shop drawings/BIM
- Packaging/room labelling
- Production/phasing/freight
- Warranty/repair/replacement
03
REQUIRED EVIDENCE / SUBMITTALS
- Material composition/performance data
- Finish/colour/sample approval
- Wet-area/stain/cleaning performance where relevant
- Exact shop drawings and production tolerances
- Mock-up / pre-production approval record
- Packaging/label/room schedule QA
- Warranty, repair and replacement strategy
04
DRAWING / CAD / BIM REGISTER
- Hospitality / room-package concept / planning layout — Public planning: Early scope, interface and consultant coordination only.
- Generic technical reference / typical detail — Public planning: Explains system logic without representing an exact supplied configuration.
- Exact-system GA / dimensional drawing — Exact-system: Issued only after the quoted system/configuration is known.
- Native CAD / DWG / DXF — Verify availability: Availability and revision must be confirmed against the exact supplied system.
- BIM / Revit / IFC object — Verify availability: Only described as BIM where a genuine verified native model exists.
- Foundation / fixing / setting-out drawing — Project-specific: Depends on site/building conditions, local engineering and the selected system.
- Services / electrical / controls interface — Project-specific: Coordinates the supplied system with local power, data, water, drainage or controls.
05
TENDER / BIDDER RETURN SCHEDULE
- Key/room schedule
- Area/package schedule
- Drawings
- Finish/sample schedule
- Mock-up requirements
- Technical evidence
- Packing/label schedule
- Production/phasing
- Freight/site receiving
- Warranty/spares
06
OPERATIONS / MAINTENANCE / HANDOVER
- Cleaning chemical controls
- Surface damage/repair procedure
- Seal/joint inspection
- Replacement component/finish register
- Public-area high-wear inspection
- Wet-area maintenance
- Room-by-room defect log
- Spare material stock
Supply boundary
Apollo NZ Global is Wholesale & Project Supply and supply-only. Local professional design, engineering, civil works, electrical work, installation, statutory approvals, commissioning and operational responsibilities remain with the appointed project parties unless expressly included in writing.
Use: planning/specification starter only. Exact selected-system evidence, current drawings and destination requirements take precedence.
NEXT STEP