Skip to main content
Apollo NZ GlobalStart Exact Project Brief

SARENTA · SPECIFICATION STARTER

Architectural Structure Systems

Use this as a controlled starting point for consultant coordination, tender preparation and project review. Replace planning language with exact project/system information before procurement.

APOLLO NZ GLOBAL · WHOLESALE & PROJECT SUPPLY

SARENTA

Architectural Structure Systems

Project
________________
Destination
________________
Status
Concept / tender starter
Review
05 Oct 2026
01

PROJECT INTENT / TECHNICAL INPUTS

  1. Destination, project use and occupancy model
  2. Required clear span, length, eave/ridge height and internal clearances
  3. Wind, snow where relevant, seismic and other local structural criteria
  4. Envelope pathway: membrane, hard wall, glazing, insulation or mixed
  5. Openings, doors, loading access and emergency/egress interfaces
  6. Fire, acoustics, HVAC, lighting and internal-environment requirements
  7. Foundation, anchoring, site levels, drainage and ground conditions
  8. Freight, site access, erection sequence and local installation responsibility
02

PERFORMANCE / SPECIFICATION CLAUSES

  1. Use/occupancy and design life
  2. Plan geometry, span and clear-height requirements
  3. Structural design criteria and local professional interfaces
  4. Primary frame/material system
  5. Roof/wall/envelope and insulation pathway
  6. Openings/doors/services coordination
  7. Fire/acoustic/HVAC/lighting interfaces
  8. Foundation/anchoring and drainage responsibilities
  9. Manufacturing, QA, freight, erection and handover
03

REQUIRED EVIDENCE / SUBMITTALS

  1. Exact structural series and material specification
  2. Current span/configuration limits tied to the selected system
  3. Membrane/material weight and fire-performance evidence where applicable
  4. Project structural calculations and drawings for the actual design criteria
  5. Connection, anchoring and foundation reactions for local engineering
  6. Opening/envelope component evidence for the selected configuration
  7. QA, warranty, manuals and inspection/maintenance documentation
04

DRAWING / CAD / BIM REGISTER

  1. Clear-span structure concept / planning layout — Public planning: Early scope, interface and consultant coordination only.
  2. Generic technical reference / typical detail — Public planning: Explains system logic without representing an exact supplied configuration.
  3. Exact-system GA / dimensional drawing — Exact-system: Issued only after the quoted system/configuration is known.
  4. Native CAD / DWG / DXF — Verify availability: Availability and revision must be confirmed against the exact supplied system.
  5. BIM / Revit / IFC object — Verify availability: Only described as BIM where a genuine verified native model exists.
  6. Foundation / fixing / setting-out drawing — Project-specific: Depends on site/building conditions, local engineering and the selected system.
  7. Services / electrical / controls interface — Project-specific: Coordinates the supplied system with local power, data, water, drainage or controls.
05

TENDER / BIDDER RETURN SCHEDULE

  1. Project location and use
  2. Dimensioned plan/section requirements
  3. Design wind/snow/seismic criteria
  4. Envelope and insulation schedule
  5. Opening/door schedule
  6. Services and internal fit-out interfaces
  7. Structural evidence and drawing requirements
  8. Foundation/anchoring responsibility matrix
  9. Freight/site access/erection programme
  10. Warranty, inspection and maintenance
06

OPERATIONS / MAINTENANCE / HANDOVER

  1. Primary-frame visual inspection
  2. Membrane/envelope inspection and cleaning
  3. Connection/fastener/anchor inspection
  4. Doors/openings/hardware service
  5. Drainage and water-management checks
  6. Coating/corrosion inspection where relevant
  7. Storm/high-wind operating procedure for applicable elements
  8. Maintenance log, spare parts and periodic structural review

Supply boundary

Apollo NZ Global is Wholesale & Project Supply and supply-only. Local professional design, engineering, civil works, electrical work, installation, statutory approvals, commissioning and operational responsibilities remain with the appointed project parties unless expressly included in writing.

Use: planning/specification starter only. Exact selected-system evidence, current drawings and destination requirements take precedence.

NEXT STEP

Check actual document availability before issuing the pack as an exact product requirement.

Evidence / CAD Matrix
Project