VELARIS + LUNVIQ · SPECIFICATION STARTER
Outdoor Blind & Roller Screen Systems
Use this as a controlled starting point for consultant coordination, tender preparation and project review. Replace planning language with exact project/system information before procurement.
APOLLO NZ GLOBAL · WHOLESALE & PROJECT SUPPLY
VELARIS + LUNVIQ
Outdoor Blind & Roller Screen Systems
- Project
- ________________
- Destination
- ________________
- Status
- Concept / tender starter
- Review
- 05 Oct 2026
01
PROJECT INTENT / TECHNICAL INPUTS
- Opening width/drop, quantity and surrounding structure
- Residential, hospitality, commercial or project use
- Shade, glare, privacy, airflow, clear-view or blockout objective
- Mesh, clear-PVC, blockout or dual-layer pathway
- Manual, motorised, hybrid or smart-control requirement
- Wind exposure, severe-weather procedure and coastal/salt condition
- Cassette/track/fixing substrate and reveal/face-fit geometry
- Power, controls, sensors, access, cleaning and maintenance requirements
02
PERFORMANCE / SPECIFICATION CLAUSES
- Opening schedule and mounting condition
- Blind/screen family and cassette class
- Fabric outcome and openness/material
- Controls / motor / sensor pathway
- Wind/severe-weather operating requirements
- Coastal/environment requirements
- Fixing/substrate interface
- Electrical/control responsibilities
- Maintenance and warranty
03
REQUIRED EVIDENCE / SUBMITTALS
- Exact model size/area limits
- Fabric openness/material and UV/weather evidence
- Motor/control/sensor documentation
- Exact wind guidance tied to model, fabric and opening
- Cassette, guide and fixing information
- Coating/corrosion suitability for destination exposure
- Warranty, manuals, spare components and maintenance requirements
04
DRAWING / CAD / BIM REGISTER
- Blind / roller screen concept / planning layout — Public planning: Early scope, interface and consultant coordination only.
- Generic technical reference / typical detail — Public planning: Explains system logic without representing an exact supplied configuration.
- Exact-system GA / dimensional drawing — Exact-system: Issued only after the quoted system/configuration is known.
- Native CAD / DWG / DXF — Verify availability: Availability and revision must be confirmed against the exact supplied system.
- BIM / Revit / IFC object — Verify availability: Only described as BIM where a genuine verified native model exists.
- Foundation / fixing / setting-out drawing — Project-specific: Depends on site/building conditions, local engineering and the selected system.
- Services / electrical / controls interface — Project-specific: Coordinates the supplied system with local power, data, water, drainage or controls.
05
TENDER / BIDDER RETURN SCHEDULE
- Opening schedule
- Desired outcome by opening
- Fabric schedule
- Operation/control schedule
- Exposure/wind/coastal information
- Fixing substrate
- Power/control requirements
- Evidence and drawing requirements
- Warranty/spares/maintenance
06
OPERATIONS / MAINTENANCE / HANDOVER
- Track/guide cleaning
- Fabric cleaning and inspection
- Cassette/bottom-rail inspection
- Motor/control/sensor test
- Post-storm inspection
- Coastal fresh-water rinse
- Fastener/fixing visual inspection
- Spare motor/control/fabric pathway
Supply boundary
Apollo NZ Global is Wholesale & Project Supply and supply-only. Local professional design, engineering, civil works, electrical work, installation, statutory approvals, commissioning and operational responsibilities remain with the appointed project parties unless expressly included in writing.
Use: planning/specification starter only. Exact selected-system evidence, current drawings and destination requirements take precedence.
NEXT STEP