Two-leaf full-opening all-sky enclosure
Configuration, dimensions, certification and export availability to be confirmed.
02 / WIDE-SKY ACCESS · ASTRAVYR
All-Sky Observatory Enclosures
ASTRAVYR / VISUAL REFERENCEProduct illustration unavailable
Only official, product-matched imagery will be displayed after its model and configuration have been verified.
Opening enclosure concepts intended to provide broad access to the sky while protecting sensitive equipment when closed.
PRELIMINARY PRODUCT FAMILY · CONFIGURATIONS SUBJECT TO TECHNICAL REVIEW01 / SYSTEM OPTIONS
System concepts under review.
The following are preliminary product configurations, not confirmed available models. Final selection requires technical documentation and project review.
Three-leaf or multi-leaf all-sky enclosure
Configuration, dimensions, certification and export availability to be confirmed.
Chain-drive or hydraulic opening options; indicative project diameters include 5, 6, 8, 9 and 12.4 m
Configuration, dimensions, certification and export availability to be confirmed.
TECHNICAL CENTRE / GEOMETRY & OPERATIONS
Full opening requires a verified motion study.
An all-sky enclosure opens its leaves to expose a broad observing area; the leaf arrangement and mechanism vary by configuration and must not be inferred from a concept image.
Leaf travel
Dimensioned closed, intermediate and fully open positions, including sweep zones and collision checks.
Sky obstruction
Verify actual horizon and zenith access for the proposed telescope height and location.
Actuation and safety
Confirm drives, interlocks, emergency stop, manual recovery and weather closure.
Loads and interfaces
Review opening loads, structural anchorage, drainage, wind conditions and local engineering.
Engineering verification required · Product imagery does not establish dimensions, certification, compatibility or product availability.
02 / TECHNICAL COMPARISON
Compare the right requirements.
Technical values are intentionally withheld until model-specific technical documents are checked. The matrix identifies what buyers should compare before specifying a system.
| Specification area | Evidence required | Verification status |
|---|---|---|
| Opening mechanism | Two-leaf, three-leaf or multi-leaf; chain or hydraulic drive | Confirm for selected model |
| Clear sky access | Opening geometry and instrument clearance | Confirm for selected model |
| Fail-safe operation | Emergency close, manual override and backup power | Confirm for selected model |
| Environment | Weather sealing and site-specific loads | Confirm for selected model |
| Maintenance | Actuator life, spares and access | Confirm for selected model |
Ready to define your project?
Request an initial quotation or send a detailed RFP with drawings, equipment interfaces and local design criteria. Model specifications remain subject to verification.
03 / PROJECT DEFINITION
What we need to understand.
What sky coverage is needed for the observing programme?
What are the instrument envelope and required clearances?
Will the site be staffed or remotely operated?
What local climate and environmental loads must be considered?
04 / ENGINEERING & PROCUREMENT
Evidence before specification.
We will request and review technical documents before making project-specific performance or compliance claims.
✓ Opening travel, loads and safe-close logic
✓ Steel frame, cladding and mechanical component specifications
✓ Control interfaces, fail-safe operation and maintenance provisions