The supplier manual presents proposed assemblies, performance and warranty figures. They have not been independently validated, checked for current production, or accepted as sport governing-body certification. Final supply is subject to full manufacturer submittals, local design requirements and written warranty schedules.
Timber indoor sports-floor systems
The 2026 manual (PDF pp. 6–10) describes five SAMMY timber court subfloor assemblies. Its published top layers refer to Canadian maple and Swedish Bona UV finishes. The typical supporting panel is described as multilayer board, with steel, cypress or larch framing and a specified shock-absorption arrangement.
| Supplier reference | Class | Surface layer | Structural subfloor | Claimed service life / warranty |
|---|---|---|---|---|
| SAMMY-L001 | Event | 22 mm Canadian maple Grade A | Imported steel keel | 15–20 years / 5 years |
| SAMMY-L002 | Event | 22 mm Canadian maple Grade A | Cypress scissor keel | 15 years / 3 years |
| SAMMY-L003 | Training | 22 mm Canadian maple Grade B | Cypress scissor keel | 10 years / 2 years |
| SAMMY-L004 | Event | 22 mm Canadian maple Grade A | Single larch timber keel | 10 years / 3 years |
| SAMMY-L005 | Event / training | 20/22 mm Canadian maple Grade A | Double larch timber keel | 10 years / 3 years |
Manufacturer claims only: the stated lifespan and warranty are not Apollo warranties. Request cross-sections, exact board and joist dimensions, system thickness, moisture limits, shock absorption, ball rebound, friction, formaldehyde/emissions, timber origin and installation/environmental conditions. Source: 2026 SMART manual, PDF pp. 6–10.
Artificial turf yarn/profile references
The manual's field-lawn section (PDF pp. 18–20) identifies three example fibre profiles. All three list a 10,000–13,500 dtex range and share the following catalogue-level parameters.
| Supplier reference | Blade geometry | Pile height | Gauge | Stitch density |
|---|---|---|---|---|
| MAX120 | M-shape | 40–60 mm | 3/8 or 3/4 inch | 15–25 / 10 cm |
| DMD | Diamond shape | 40–60 mm | 3/8 or 3/4 inch | 15–25 / 10 cm |
| BZ01 | S-shape | 40–60 mm | 3/8 or 3/4 inch | 15–25 / 10 cm |
These figures specify yarn/tufting examples, not complete field systems. Ask for infill type/quantity, backing, permeability, fibre test records, shockpad and base construction, sport-specific FIFA or other relevant test reports, maintenance and warranty. Source: 2026 SMART manual, PDF pp. 18–20.
FÍSVOR — VISION SYSTEMS
Stadium perimeter LED display comparisons
The supplier manual (PDF pp. 60–63) presents VPS outdoor/indoor pitch-side perimeter LED references, including protective padding/louvres and modular construction. These are an additional supplier comparison for FÍSVOR, not replacement specifications for its existing approved display manufacturers.
| Supplier reference | Pixel pitch | Brightness | Pixels per panel | Max / avg power |
|---|---|---|---|---|
| Q6 | 6.7 mm | 5,500 nits | 144 × 144 | 760 / 310 W/m² |
| Q8 | 8 mm | 5,500 nits | 120 × 120 | 780 / 315 W/m² |
| Q10 | 10 mm | 6,500 nits | 96 × 96 | 1,000 / 400 W/m² |
The same table lists ≥3,840 Hz refresh, 14-bit greyscale, front/rear IP65/IP54, AC 220 V ±10% input and 960 × 960 × 133 mm cabinet dimensions for these three examples.
Request EMC/electrical and impact-test reports, pixel certification, power distribution, redundancy architecture, fire compliance, maintenance access, rigging interface and current SKU documentation before use in any tender. Source: 2026 SMART manual, PDF pp. 60–63.
Request a project-specific specification
Tell us the sport, usage level, area, destination, applicable test requirements, drawings and delivery timeframe. Apollo NZ Global is a supply-only wholesaler; engineering, groundwork and installation remain with the appointed local delivery team.
Submit a sports project brief