Skip to main content
Apollo NZ GlobalStart Exact Project Brief

RIGVAR + ROKVAN · SPECIFICATION STARTER

Vehicle Adventure & Overland Living Systems

Use this as a controlled starting point for consultant coordination, tender preparation and project review. Replace planning language with exact project/system information before procurement.

APOLLO NZ GLOBAL · WHOLESALE & PROJECT SUPPLY

RIGVAR + ROKVAN

Vehicle Adventure & Overland Living Systems

Project
________________
Destination
________________
Status
Concept / tender starter
Review
05 Oct 2026
01

PROJECT INTENT / TECHNICAL INPUTS

  1. Vehicle make/model/year and roof/bed/rack configuration
  2. Dynamic/static roof or rack load information
  3. Product family and occupancy/use case
  4. Packed/deployed dimensions and access
  5. Mounting bar spacing / interfaces
  6. Wind/rain/travel environment
  7. Water storage / electrical / lighting requirements
  8. Freight, replacement parts and travel-service strategy
02

PERFORMANCE / SPECIFICATION CLAUSES

  1. Vehicle interface
  2. Product weight/load
  3. Mounting/brackets
  4. Packed/deployed envelope
  5. Weather/wind use
  6. Water/electrical/accessories
  7. Travel storage/handling
  8. Warranty/spares
03

REQUIRED EVIDENCE / SUBMITTALS

  1. Exact product weight and dimensions
  2. Mounting/bracket compatibility
  3. Vehicle/rack load limits from responsible vehicle/rack source
  4. Fabric/waterproofing/weather data where relevant
  5. Electrical/lighting component evidence
  6. Water-contact material data where applicable
  7. Warranty/spares/replacement fabric/hardware
04

DRAWING / CAD / BIM REGISTER

  1. Vehicle / overland concept / planning layout — Public planning: Early scope, interface and consultant coordination only.
  2. Generic technical reference / typical detail — Public planning: Explains system logic without representing an exact supplied configuration.
  3. Exact-system GA / dimensional drawing — Exact-system: Issued only after the quoted system/configuration is known.
  4. Native CAD / DWG / DXF — Verify availability: Availability and revision must be confirmed against the exact supplied system.
  5. BIM / Revit / IFC object — Verify availability: Only described as BIM where a genuine verified native model exists.
  6. Foundation / fixing / setting-out drawing — Project-specific: Depends on site/building conditions, local engineering and the selected system.
  7. Services / electrical / controls interface — Project-specific: Coordinates the supplied system with local power, data, water, drainage or controls.
05

TENDER / BIDDER RETURN SCHEDULE

  1. Vehicle schedule
  2. Rack/load information
  3. Product quantity
  4. Mounting interface
  5. Use/environment
  6. Water/electrical needs
  7. Packing/freight
  8. Evidence/warranty
06

OPERATIONS / MAINTENANCE / HANDOVER

  1. Mounting/fastener check
  2. Fabric drying/cleaning
  3. Hinge/strut/zipper service
  4. Awning/tent wind procedure
  5. Water-system hygiene
  6. Lighting/electrical check
  7. Travel damage inspection
  8. Spare hardware/fabric repair kit

Supply boundary

Apollo NZ Global is Wholesale & Project Supply and supply-only. Local professional design, engineering, civil works, electrical work, installation, statutory approvals, commissioning and operational responsibilities remain with the appointed project parties unless expressly included in writing.

Use: planning/specification starter only. Exact selected-system evidence, current drawings and destination requirements take precedence.

NEXT STEP

Check actual document availability before issuing the pack as an exact product requirement.

Evidence / CAD Matrix
Project